self-priming centrifugal oil pump

Experimental study on shooting self-priming device of self-priming centrifugal pump with inner recirculation;

内混式自吸离心泵射流自吸装置的试验研究

Aim at 5 inner recirculation self-priming centrifugal pumps that specific speed are 74~112,adopt 3 different inner-diameter suction pipes and 6 kinds of separation tongue gap,a more overall experimental study on self-priming time under rule height and the max vacuum that can be attained was carry on.

针对比转速为74~112的5台内混式自吸离心泵,采用3种不同直径吸水管和6种不同隔舌间隙,对其规定高度自吸时间和极限真空度进行了较全面的试验研究,并对试验结果进行了综合分析。

Designing Theory、Numerical Simulation and Testing Study on the Jetted Self-Priming Centrifugal Pump;

射流式自吸离心泵的设计理论、数值模拟及实验研究

single-stage self-priming centrifugal fresh water pump

单级自吸式离心清水泵

Marine self-priming centrifugal oil pump CZY-type

GB/T8413-1996CZY型船用自吸离心式油泵

single-stage self-priming overhang type centifugal fresh water pump

单级自吸悬臂式离心清水泵

Experimental Study on Improving Water Absorption Properties of Centrifugal Pump by Water Jet;

利用射流器改善离心泵吸水性能研究

Numerical Simulation and Investigation of the Flow Field for a Double Suction Centrifugal Pump;

双吸式离心泵内部流场数值模拟研究

Jiangsu Jingjiang Qianjin pump& valve manufacturing factory, lt is engaged in centrifugal pumps and measure pumps which is named as national middle enterprise.

江苏靖江市前进泵阀制造厂是从事立、式、、吸离心泵、量泵等石油化工泵专业制造的企业。

" End-suction centrifugal pumps (rating 16 bar)--Designation, nominal duty point and dimensions"

GB/T5662-1985轴向吸入离心泵(16bar)标记、性能和尺寸

End-suction centrifugal pumps--Baseplate and installation dimensions

GB/T5660-1985轴向吸入离心泵底座尺寸和安装尺寸

Experimental research on reducing the leaf caritation of double attracts centrifugal pump

减轻双吸式离心泵叶片汽蚀的试验研究

3D Modeling and Aseismatic Analysis of the Double-suction Centrifugal Pump

双吸式离心泵的三维造型及其抗震性能分析

Simulation of Reverse Flow in Low Specific Speed Double Suction Centrifugal Pump

低比转数双吸离心泵回流问题的CFD研究

Numerical study on separation chamber of rotational flow in self-priming pump

旋流自吸泵气液分离室结构对性能影响的预测

Jiangsu Jingjiang changzheng pump& valve manufacturing factory, lt is engaged in centrifugal pumps and measure pumps which is named as national middle enterprise.

江苏靖江市长征化工机械厂是从事立、式、、吸离心泵、量泵等石油化工泵专业制造的企业。

low-head centrifugal pump

低水头离心泵，低扬程离心泵

Theory Analysis about Axial Force of Centrifugal Pump with Floating Impeller and Self-poise Ability

浮动叶轮自动平衡离心泵轴向力的理论分析

self priming pump

自吸泵，自引泵(启动时不用灌水)

" Test methods for centrifugal, mixed flow, axial and regenerative pumps"

GB/T3216-1989离心泵、混流泵、轴流泵和旋涡泵试验方法