minimum allowable radius

Research on Method to Confirm Minimum Radius of Circular Curve of Mountain Expressway;

山区高速公路圆曲线最小半径确定方法的研究

According to the speed and overload during vertical maneuver,the minimum radius, its speed as well as rapid rotating speed are calculated and analyzed for upward level flight, downward inverted flight and vertical ma-neuver.

根据某新机飞行人员的要求,对其正飞向上,倒飞向下和垂直位置进行机动的最小半径及其速度、快转速度进行了一系列的计算与分析,从中得出飞机中低空(1000～5000米)进行垂直机动的最佳速度和过载,为某新机垂直机动训练中,提高质量,保证安全提供了可行的理论依据,并在飞行训练中得到了验证。

This paper considers the minimum radius problem of ball-coverings with the cardinality m(≥n+1) in n by the neural network method.

本文采用神经网络方法研究n中球覆盖最小半径的计算问题,重新给出计算基数为m(≥n+1)的球覆盖最小半径的公式(对于m=2n(对称)和m=n+1给出了解析表达式),然后基于罚函数法建立神经网络模型,该模型的平衡点集具有大范围吸引性且(渐近)稳定平衡点等价于(严格)极大值点。

The maximum and minimum bubble radii as well as the oscillation times for the first two oscillation cycle are determined according to the characteristic signals.

结果表明:表面张力延缓了空泡的膨胀过程,加速了空泡的收缩,缩短了空泡脉动周期;表面张力越大,空泡对应的最大泡半径越小而收缩所能达到的最小泡半径亦越小;表面张力加强了空泡泡能的损失。

Research on Method to Confirm Minimum Radius of Circular Curve of Mountain Expressway;

山区高速公路圆曲线最小半径确定方法的研究

minimum digging radius at floor level

停机面最小挖掘半径

Study on the Minimum Value of Curve Radius in Shield Construction;

盾构法施工最小曲线半径取值的研究

The Ordering of the Connected Graphs with the Smallest Laplacian Spectral Radii;

连通图的最小Laplace谱半径的排序

The Research of Lowest Radius to High-Speed Railways with Ballastless Tracks;

无碴轨道高速铁路最小曲线半径研究

Mathematic calculation approach of minimum bending radius of mandrel based on Matlab

基于Matlab的芯轴最小弯曲半径计算

Lower and Upper Orientable Strong Radius and Diameter of Cartesian Product of Paths

路和路的笛卡尔积的最小和最大定向强半径和强直径(英文)

The Calculation of the Minimal Turning Radius and the Setting of the Fire Road Width

消防车道最小转弯半径以及通道宽度的计算

Study on Curve Radius Standard for Linear Metro

直线电机轮轨交通线路最小平曲线半径研究

Clustering Algorithm Based on Residual Energy and Least Adjacent Clustering Radius

基于剩余能量与最小邻近簇半径的成簇算法

Defining Minimum Base Radius of Plate Cam for Oscillating Follower by 0.618 Optimization Method

0.618法最优确定盘状摆动凸轮机构的最小基圆半径

radial gap of double-cone ring

双锥环的最大半径间隙

maximum reach at ground level

停机面最大挖掘半径

All sharp corners to have 0.01 Max. Radii.

所有尖角最大半径0.01

ALL INSIDE CORNERS TO BE .38 RADIUS MAX

所有内角最大半径0.38

DETERMING THE MINIMAL RADIUS OF BASE CIRCLE OF A CAM WITH TRANSLETINGA POINT FOLLOWER ACCORING TO THE ALLOWABLE PRESSURE ANGLE[α]

按许用压力角(α)确定直动从动件盘形凸轮机构凸轮最小基圆半径

A Study of Burr Fillister Sizes as well as the Minimum Fillet Radius of a Final Forging Die with the Finite Element Method

毛边槽尺寸与终锻模最小圆角半径的有限元法研究

Study on the Criteria for Minimum Radius of Curve and the Transition Curve for 160km/h Railway Track

时速160公里铁路最小曲线半径与缓和曲线设计标准的研究