rolling schedule

The off-line simulation program was compiled by C++ language and the temperature field and thermal crown were calculated according to the rolling schedule,thus obtaining roll surface temperature and thermal deformation at different moments.

研究了国内某1700热连轧机轧辊温度场有限差分模型及热凸度模型,采用C++语言编制离线仿真程序,计算某一轧制周期工作辊温度场及热凸度,得到轧制过程不同时刻工作辊表面温度及热变形情况。

Simulation of Three Dimensional Finite Element of Width Deformation for Rougher in the Rolling Process;

轧制过程中粗轧宽度变形的三维有限元模拟

Effect of rolling and heat treatment on mechanical properties and microstructure of WE43 magnesium alloy;

轧制及热处理对WE43镁合金组织和性能的影响

Probe into Friction Mechanism in the Plastic Working in Rolling;

轧制塑性加工中的摩擦机理探究

Effects of heat treatment on microstructure and mechanical properties of rolled AM50+xCa magnesium alloys;

热处理对轧制AM50+xCa组织及力学性能的影响

Finite element simulation of temperature field during rolling process of low-alloyed wide and thin plate;

低合金宽薄板轧制过程温度场的有限元模拟

Study on the clad ratio and length ratio of metal roll bonding;

金属复合轧制包覆率和长度配比的研究

Deformation distribution of multi-filament superconducting tape during rolling process;

多芯铋系超导材料轧制过程中的变形分布研究

Study on sheet rolling process of SiC_p particulate reinforced aluminum matrix composite;

SiC颗粒增强铝基复合材料薄板轧制工艺研究

The effects of rolling processing on the formability, microstructure and mechanical properties of the asextruded spray co-deposited 7075/SiCp composite were investigated.

本文研究了轧制方式、轧制温度等对SiC颗粒增强铝基复合材料显微组织和力学性能的影响。

Research and development of multi-drive physical simulation platform of the endless rolling system;

无头轧制多级传动模拟实验平台的研究与开发

Welding technology of billets during endless rolling;

无头轧制过程中钢坯的焊接技术

Multidrive system of endless rolling of hot stick mill in Tangshan Iron and Steel Co;

唐钢无头轧制多级传动系统

The technology of roll-bonding was applied to prepare the foaming precursor in this paper.

将轧制复合工艺应用于发泡预制体的制备,研究了粉末致密化过程与面板/芯层的结合机制。

Author studied the production technology of aluminum foam sandwich prepared by roll-bonding/powder metallurgy foaming process in this paper,and analyzed the effect of main technological conditions on foaming structure of sandwich layer,and optimum technological parameters were finally obtained.

研究了采用轧制复合-粉末冶金发泡法制备的泡沫铝夹心板的生产工艺,探讨了主要工艺条件对芯层泡沫结构的影响,得到了优化的工艺参数。

The dynamic temperature field during roll-bonding combined with high-frequency alternating current heating has been numerically simulated by a simplified model.

通过数值模拟获得了高频加热-轧制复合过程中的动态温度场。