left slot

Study on Pad Groove Design in Chemical Mechanical Polishing;

化学机械抛光中抛光垫表面沟槽的研究

Analysis of tube burst resulted from the cavitation grooves on waterwall at the furnace arch of boiler;

锅炉折焰角水冷壁管空化沟槽造成爆管原因分析

In the paper, the vacuum infusion molding process based on grooves was investigated by experiments, and the parameters of width, d e pth and spacing for flow grooves and spacing for supply grooves were optimized a ccording on the molding experiments and various factors that had influence on th e mold filling process were discussed.

　真空注射成型工艺是一种新型的复合材料液体模塑成型工艺,对沟槽型真空注射成型工艺开展了实验研究,通过充模实验确定了引流槽的宽度、深度和槽间距及主槽的槽间距等工艺参数并进行了优化;对影响充模过程的各种因素进行了详细的讨论,并以夹芯面板的制作实例阐述了沟槽型真空注射成型的工艺过程。

However, the rigid road surface poses strict requirements on proper roadbeds, whereas roads in town have many examining wells for underground pipes and grooves, which is potential threat to road surface and ~ cause its forepart breakage.

本文着重从城市道路最易出问题的环节：沟槽及检查井回填土质量、路基压实的质量、水泥混凝土面层施工工艺质量三方面论述水泥混凝土路面早期破坏机理，提出预防措施。

The Sand-Removing Machine Used between the Thin Wall Furrows of Cast Iron Parts;

铸铁件薄壁沟槽间用清砂机的研制

Influence of construction machinery eccentric load on stability of trench excavation;

建筑机械偏心荷载对开挖过程中沟槽稳定性的影响研究

Stability of trench excavation by construction machinery;

建筑机械开挖沟槽的稳定性研究

Design and Optimization of 30 V Trench MOSFET;

30V沟槽MOSFET优化设计

A furrow or groove, as in a column.

沟槽如柱子上的槽或沟槽

Grooved pins--Parallel grooved

GB/T13829.1-1992槽销平行沟槽

a plane for making a dado groove.

用来制作沟槽的刨子。

To form grooves or deep wrinkles in.

在…开出沟槽，使起深皱纹

To form(a passage or channel) by erosion.

侵蚀成（通路或沟槽）

To flow in channels or rivulets.

在沟槽或小溪中流淌

Development of Trench MOSFET

沟槽型MOSFET的发展(英文)

D. Clean the slots of O-rings, Talfon slots, body spindle and spherical surface intensively.

形环沟槽，铁氟沟槽，主体轴心孔及球面加强清洗。

A slot for a key in the hub or shaft of a wheel.

键槽轮子的毂或轴里的键的沟槽

A trough or channel for carrying something off, such as that on either side of a bowling alley.

沟槽把某物排走的槽或沟，比如在保龄球道两边的球槽

a groove or furrow in cloth etc especially the shallow concave groove on the shaft of a column.

衣料上沟槽或皱纹特别是柱状物轴线上的浅槽。

A grooved timber in which something slides.

滑缝，滑槽带有沟槽的木块，可以使东西滑过

Experimental Application of Pre-baked Slot Anode in 300 kA Aluminum Smelting Pot

预焙沟槽阳极在300kA铝电解槽上的试验与应用

To groove or flute the rim of(a coin or other metal object).

印出沟槽在（钱币或其他金属制品）的边上印出沟槽的

We waste the dirty water by channeling it into the sewer.

我们通过沟槽把脏水排放到下水道中。

having deep narrow furrows or grooves.

有窄而深的纹路或沟槽的。

The grooved face of a tire.

胎面花纹车胎的有沟槽的表面

grooved drum washing machine

带沟槽圆筒洗涤机(针织品加工)