left corner

On the basis of residual areas after rough machining,a tool path generation algorithm for residual material fine machining at the corners of pocket boundary was developed and implemented in consideration of even radial cutting depth and smooth tool path.

在识别粗加工余料区域的基础上,从均匀径向切削深度、平滑刀轨路径等方面考虑,研究并实现了型腔边界拐角处的精加工刀轨生成算法。

Sharp turning corners of the tool path are rounded, and the transition from a tool path track to the neighboring one is fulfiled through smooth curves.

在常规的环切刀轨生成算法基础上 ,设计了型腔高速铣削加工刀轨生成算法 对刀轨的拐角进行了平滑处理 ,实现了相邻刀轨环之间的光滑曲线过渡 ,避免了刀具运动方向的急剧变化 ,可使切削性能得到改

General linear and nonlinear smoothing in an intensity image can blur corners seriously, so it s difficult to detect corners by a multi scale approach.

对灰度图进行一般线性和非线性平滑会极大程度地模糊拐角 ,使得多尺度方法难以用于拐角检测 。

The check-in counter for International flights is on the left corner of the hall.

国际航班值机柜台在大厅左拐角。

Turn the second corner to the left .

在第二个拐角处向左拐。

Make a left at the third turning.

在第三个拐角处往左转。

To the corner and then a left?

走到拐角向左转对吗

Well, turn to the left at the first corner after the crossroads.

噢，过十字路口后在第一个拐角向左拐。

About three hundred yards farther on there is a turning to the left.

再往前大约300码有一个向左拐的拐角。

then make a left. You'll find a subway entrance on the corner.

再往左拐。在拐角处你就会看到一个地铁入口。

The left-hand side. It's on a corner. Are you a stranger in town?

在左手边的拐角上。你对本地不熟吗?

Just cross the street and go around the corner on the left .

只要过街，在左边的拐角处转弯就是。

Follow this road until you get to the corner, then turn leave

沿著这条路走到拐角处, 然後向左转

Follow this road until you get to the corner, then turn left.

沿着这条路走到拐角处, 然後向左转.

Follow this road until you get to the corner, then turn leave.

沿著这条路走到拐角处, 然後向左转。

Then turn left at the crossroad. There is a bus stop at the corner.

然后在十字路口向左拐。在拐角处有个公共汽车站。

Turn left at the corner and go straight ahead until you see a red brick building.

在拐角处向左拐，然后一直走直到你看见一个红砖砌的大楼。

Turn that corner to the right and you'll find it on your left.

到那个拐角向右转，你会发现它就在左边。

Go on until you get to the next corner and then turn left.

一直往前走，到了第一个拐角，就向左转弯。

and take the third turning on the left.

在第三个拐弯处向左拐，

Take the second turn to the leave.

在第二个拐弯处向左拐。